STEERING PAD > INSTALLATION |
| 1. INSTALL STEERING PAD |
![]() |
Support the steering pad with one hand, as shown in the illustration.
Connect the 2 airbag connectors.
Connect the horn ground harness to the steering pad.
![]() |
Confirm that the circumference groove of the "torx" screws fits in the screw case, and install the steering pad.
Using a "torx" socket wrench (T30), install the 2 screws.
| 2. INSTALL NO.3 LOWER STEERING WHEEL COVER |
Engage the 2 claws, install the No. 3 lower steering wheel cover to the steering wheel assembly.
| 3. INSTALL NO.2 LOWER STEERING WHEEL COVER |
Engage the 2 claws, install the No. 2 lower steering wheel cover to the steering wheel assembly.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 5. INSPECT STEERING PAD ASSEMBLY |
| 6. INSPECT SRS WARNING LIGHT |