FRONT AIRBAG SENSOR > INSTALLATION |
| 1. INSTALL FRONT AIRBAG SENSOR |
Check that the ignition switch is OFF.
Check that the cable is disconnected from the battery negative (-) terminal.
Check that there is no slack in the installation parts of the front airbag sensor.
Connect the connector to the front airbag sensor.
Install the front airbag sensor with the bolt.
| 2. INSTALL RADIATOR GRILLE |
![]() |
Engage the 2 clips and install the radiator grille.
Install the 2 clips.
Tighten the 2 screws.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 4. INSPECT SRS WARNING LIGHT |