Home › BRAKE › BRAKE CONTROL › ANTI-LOCK BRAKE SYSTEM

ANTI-LOCK BRAKE SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
The intelligent tester can be used at step 3, 6, 9, 12.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.DTCS AND FREEZE FRAME DATA CHECK AND CLEARANCE

        HINT:
        Click here and Click here


      NEXT


      4.PROBLEM SYMPTOM CONFIRMATION

        Result
        Proceed to
        Symptom occurs
        A
        Symptom does not occur
        B


      B.
      SYMPTOM SIMULATION
      A


      5.DTC CHECK

        HINT:
        Click here


        Result
        Proceed to
        DTC output
        A
        DTC not output
        B


      B.
      PROBLEM SYMPTOMS TABLE
      A


      6.DTC CHART

        HINT:
        Click here


      NEXT


      7.CIRCUIT INSPECTION

        HINT:
        When 2 or more DTCs are recorded, and the problem cannot be identified, perform circuit inspection of the other DTCs.


      NEXT


      8.PROBLEM IDENTIFICATION

        NEXT


        9.REPAIR OR REPLACEMENT

          NEXT


          10.CONFIRMATION TEST

            NEXT

            END