Home › BRAKE › BRAKE CONTROL › ANTI-LOCK BRAKE SYSTEM

DTC    C0226/21    SFR Solenoid Circuit

DTC    C0236/22    SFL Solenoid Circuit

DTC    C0246/23    SRR Solenoid Circuit

DTC    C0256/24    SRL Solenoid Circuit

for Preparation Click here


DESCRIPTION

The solenoid goes on when signals are received from the ECU and controls the pressure action on the wheel cylinders thus controlling the braking force.

DTC No.
DTC Detecting Conditions
Trouble Areas
C0226/21
Open or short in SFRH or SFRR circuit for 0.05 seconds or more.
  1. Brake actuator
  2. SFRH or SFRR circuit
C0236/22
Open or short in SFLH or SFLR circuit for 0.05 seconds or more.
  1. Brake actuator
  2. SFLH or SFLR circuit
C0246/23
Open or short in SRRH or SRRR circuit for 0.05 seconds or more.
  1. Brake actuator
  2. SRRH or SRRR circuit
C0256/24
Open or short in SRLH or SRLR circuit for 0.05 seconds or more.
  1. Brake actuator
  2. SRLH or SRLR circuit

WIRING DIAGRAM


C124741E01


INSPECTION PROCEDURE

1.RECONFIRM DTC
  1. Clear the DTCs (Click here).

  1. Drive the vehicle at 6 mph (10 km/h) or more to activate initial check.

  1. Check if the same DTCs are detected.

    Result
    Proceed to
    DTC output
    A
    DTC not output
    B



B
END
A

REPLACE BRAKE ACTUATOR