Home › TRANSMISSION ยท A750E AUTOMATIC TRANSMISSION › VALVE BODY ASSEMBLY

VALVE BODY ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY


D028695E02
  1. Install the shift solenoid valve S2 with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

  1. Install the shift solenoid valve S1 with the bolt.

    Torque:
    6.4 N*m{ 65 kgf*cm , 56 in.*lbf }

  1. Install the shift solenoid valve SR with the 2 bolts.

    Torque:
    6.4 N*m{ 65 kgf*cm , 56 in.*lbf }

  1. Install the shift solenoid valves SLU and SL2 with the pin, lock plate and bolt.

    Torque:
    6.4 N*m{ 65 kgf*cm , 56 in.*lbf }

  1. Install the shift solenoid valves SLT and SL1 with the pin, lock plate and bolt.

    Torque:
    6.4 N*m{ 65 kgf*cm , 56 in.*lbf }



    D028696E02
  1. Insert the pin of the lever into the hole of the manual valve.

  1. Install 3 new drum seal gaskets onto the transmission case.



    D028694E02
  1. Install the 19 bolts.

    Torque:
    11 N*m{ 110 kgf*cm , 8 ft.*lbf }

    Bolt length:
    Bolt A: 36 mm (1.42 in.)
    Bolt B: 25 mm (0.98 in.)



2. INSTALL TRANSMISSION WIRE


D028693E05
  1. Connect the 7 connectors to the solenoid valves.

  1. Install the clamp with the bolt.

    Torque:
    A:
    10 N*m{ 100 kgf*cm , 7 in.*lbf }
    B:
    11 N*m{ 110 kgf*cm , 8 in.*lbf }

  1. Connect the ATF temperature sensor.

    Wiring color:
    a: Orange
    b: Blue



3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY


D028692
  1. Install a new O-ring and the oil strainer with the 4 bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }



4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

HINT:
Remove all packing material and be careful not to drop oil on the contact surfaces of the transmission case and oil pan.

  1. Install a new gasket and the oil pan sub-assembly.



    F051848
  1. Install the oil pan with the 20 bolts.

    Torque:
    4.4 N*m{ 45 kgf*cm , 39 in.*lbf }



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }



6. PERFORM INITIALIZATION
(Click here)


7. ADD AUTOMATIC TRANSMISSION FLUID
(Click here)