FRONT DOOR (w/o Power Window) > REASSEMBLY |
| 1. INSTALL FRONT DOOR WEATHERSTRIP LH (for Regular Cab) |
![]() |
Engage the 36 clips and install a new front door weatherstrip LH.
Remove the tab tape at both ends of 2-sided tape attached to the weather strip, and attach the weather strip to the door panel with the 2-sided tape.
| 2. INSTALL FRONT DOOR WEATHERSTRIP LH (for Access Cab) |
![]() |
Engage the 36 clips and install a new front door weatherstrip LH.
Remove the tab tape at both ends of 2-sided tape attached to the weather strip, and attach the weather strip to the door panel with the 2-sided tape.
| 3. INSTALL FRONT DOOR CHECK ASSEMBLY LH |
![]() |
Apply MP grease to the sliding areas of the check.
Install the front door check assembly LH onto the door panel with the 2 nuts.
Apply adhesive to the threads of the bolt.
Install the front door check assembly LH onto the body panel with the bolt.
| 4. INSTALL FRONT DOOR OUTSIDE HANDLE FRAME SUB-ASSEMBLY LH |
![]() |
Using a torx socket wrench T30 , install the outside handle frame sub-assembly with the screw.
| 5. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH |
![]() |
Engage the 3 claws and install the front door outside handle front pad.
![]() |
Engage the 2 claws and install the front door outside handle rear pad.
![]() |
Pushing the front door outside handle assembly LH in the direction of the arrow marks shown in the illustration, install the front door outside handle assembly LH.
| 6. INSTALL FRONT DOOR LOCK ASSEMBLY LH |
Apply MP grease to the sliding and rotating parts of the front door lock assembly LH.
![]() |
Insert the door lock open rod into the front door lock assembly, then set it to the door panel.
![]() |
Apply adhesive to the threads of the screws.
Using a torx socket wrench T30 , install the front door lock assembly LH with the 3 screws.
| 7. INSTALL FRONT DOOR OUTSIDE HANDLE COVER LH |
![]() |
Using a torx socket wrench T30 , install the front door outside handle cover LH with the screw.
Install the hole plug.
| 8. INSTALL FRONT DOOR FRONT LOWER FRAME SUB-ASSEMBLY LH |
![]() |
Install the front door front lower frame sub-assembly LH with the 2 nuts.
| 9. INSTALL FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY LH |
![]() |
Install the front door rear lower frame sub-assembly LH with the 2 bolts.
| 10. INSTALL FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY LH |
Apply MP grease to the sliding and rotating areas of the front door window regulator sub-assembly LH.
![]() |
Loosely screw bolt A onto the front door window regulator sub-assembly LH.
Insert the front door window regulator into the door panel. Use bolt A to hang the front door window regulator on the door panel.
Install the front door window regulator with the 4 bolts, and tighten bolt A.
| 11. INSTALL FRONT DOOR GLASS RUN LH |
![]() |
Install the front door glass run LH.
| 12. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH |
![]() |
Insert the front door glass sub-assembly LH into the door panel along the glass run as indicated by the arrow marks in the illustration.
![]() |
Install the front door glass sub-assembly LH onto the front door window regulator sub-assembly LH with the 2 bolts.
| 13. INSTALL FRONT DOOR INSIDE PANEL PLATE LH |
![]() |
Install the front door inside panel plate LH.
| 14. INSTALL FRONT DOOR BELT MOULDING LH |
![]() |
Engage the 5 claws and install a new front door belt moulding.
| 15. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH |
![]() |
Engage the claw and install the outer rear view mirror.
Tighten the 3 nuts.
Connect the outer rear view mirror connector (w/ Power Mirror).
| 16. INSTALL FRONT DOOR SERVICE HOLE COVER LH |
![]() |
Apply butyl tape to the door panel, and install the front door service hole cover LH as shown in the illustration.
| 17. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY LH |
![]() |
Connect the 2 cables to the front door inside handle sub-assembly LH.
![]() |
Engage the 3 claws and install the front door inside handle sub-assembly LH onto the door panel.
| 18. INSTALL FRONT NO. 1 SPEAKER BRACKET |
![]() |
Install the front No. 1 speaker bracket with the 3 screws.
Connect the wire harness clamp and connector.
| 19. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY |
![]() |
Engage the claw.
![]() |
Install the front No. 2 speaker assembly with the 2 bolts.
Connect the connector.
| 20. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY |
| 21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 22. INSTALL FRONT DOOR TRIM PANEL ASSEMBLY LH |
![]() |
Engage the 10 clips and install the front door trim panel assembly LH.
![]() |
Install the 3 screws.
![]() |
Engage the 8 claws and install the door assist grip cover LH.
![]() |
Close the cover.
| 23. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH |
![]() |
Engage the 3 clips and install the front door lower frame bracket garnish LH.
| 24. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY |
![]() |
Install the window regulator handle plate.
![]() |
Install the front door window regulator handle assembly with the snap ring.