Home › MAINTENANCE › MAINTENANCE › BRAKE

BRAKE > GENERAL MAINTENANCE



1. INSPECT BRAKE LINE PIPES AND HOSES


P009958E01

HINT:
Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning.

  1. Check all the brake lines and hoses for:

    1. Damage
    2. Wear
    3. Deformation
    4. Cracks
    5. Corrosion
    6. Leaks
    7. Bends
    8. Twists

  1. Check all the clamps for tightness and the connections for leakage.

  1. Check if the hoses and lines are not near sharp edges, moving parts and the exhaust system.

  1. Check if the lines are installed pass through the center of the grommets.



2. INSPECT FRONT BRAKE PADS AND DISCS


S002432E01

HINT:
  1. 2WD: Click here
  2. 4WD and Pre-runner: Click here
  3. If a squealing or scraping noise is heard from the brake while driving, check the pad wear indicator.
  4. If there are traces of the indicator contacting the disc rotor, the disc pad should be replaced.



3. INSPECT REAR BRAKE DRUM

HINT:
Click here



4. INSPECT BRAKE FLUID

Fluid:
SAE J1703 or FMVSS No. 116 DOT3

HINT:
  1. w/ VSC (Click here)
  2. w/o VSC (Click here)