DTC C2165/65 Abnormal Temperature Inside ID1 Tire |
DTC C2166/66 Abnormal Temperature Inside ID2 Tire |
DTC C2167/67 Abnormal Temperature Inside ID3 Tire |
DTC C2168/68 Abnormal Temperature Inside ID4 Tire |
DTC C2169/69 Abnormal Temperature Inside ID5 Tire |
| DTC No. | DTC Detecting Condition | Trouble Area |
| C2165/65 C2166/66 C2167/67 C2168/68 C2169/69 | Tire internal temperature exceeds 119 °C (246.2°F) more than once. |
|
| 1.IDENTIFY TRANSMITTER (CORRESPONDING TO DTC) |
Set the tire pressures to the appropriate specified values.
| Tire Size | Front Wheel kPa (kgf/cm2, psi) | Rear Wheel kPa (kgf/cm2, psi) | Spare Wheel kPa (kgf/cm2, psi) |
| P215/70R 15 | 200 (2.0, 29) | 220 (2.2, 32) | 220 (2.2, 32) |
| P255/45 R18 | 240 (2.4, 34) | 240 (2.4, 34) | 240 (2.4, 34) |
| P245/75 R16 | 200 (2.0, 29) | 200 (2.0, 29) | 200 (2.0, 29) |
| P265/70 R16 (ORP)* | 200 (2.0, 29) | 220 (2.2, 32) | 220 (2.2, 32) |
| P265/65 R17 | 200 (2.0, 29) | 200 (2.0, 29) | 200 (2.0, 29) |
![]() |
Jack up the vehicle.
Select TIREPRESS by following the prompts displayed on the intelligent tester.
| Item | Measurement Item/ Range (Display) |
| TIREPRESS1 | ID1 tire inflation pressure/ minimum: 0 kPa (0 kgf/cm2, 0 psi) maximum: 637.5 kPa (6.5 kgf/cm2, 92.5 psi) |
| TIREPRESS2 | ID2 tire inflation pressure/ minimum: 0 kPa (0 kgf/cm2, 0 psi) maximum: 637.5 kPa (6.5 kgf/cm2, 92.5 psi) |
| TIREPRESS3 | ID3 tire inflation pressure/ minimum: 0 kPa (0 kgf/cm2, 0 psi) maximum: 637.5 kPa (6.5 kgf/cm2, 92.5 psi) |
| TIREPRESS4 | ID4 tire inflation pressure/ minimum: 0 kPa (0 kgf/cm2, 0 psi) maximum: 637.5 kPa (6.5 kgf/cm2, 92.5 psi) |
| TIREPRESS5 | ID5 tire inflation pressure/ minimum: 0 kPa (0 kgf/cm2, 0 psi) maximum: 637.5 kPa (6.5 kgf/cm2, 92.5 psi) |
Rapidly release the tire pressure from any tire to 40 kPa (0.4 kgf/cm2, 5.8 psi)/ 30 seconds or more.
| Display | Detection Condition |
| One of TIREPRESS data (ID1 to ID5) changed | Normal |
| No TIREPRESS data changed | Transmitter corresponding to DTC |
When one of the TIREPRESS data (IDs 1 to 5) changes, repeat the same procedure on the rest of tires one by one to identify which tire pressure warning valve and transmitter the DTC corresponds to. Set the tire pressures to the appropriate specified values.
When all the TIREPRESS data (IDs 1 to 5) has been change, identify the malfunctioning tire pressure warning valve and transmitter by using recorded ID numbers and output DTC.
| NEXT | |
| 2.CHECK TIRES |
|
| ||||
| OK | ||
| ||