Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › AIRBAG CUT-OFF SWITCH

AIRBAG CUT-OFF SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL AIRBAG CUT-OFF SWITCH


    C123153
  1. Engage the 2 claws of the cut off switch with the instrument cluster finish panel sub-assembly center.

  1. Attach the connector to the airbag cut off switch.



2. INSTALL SWITCH BASE HOLE COVER


    C121180
  1. Disengage the 3 claws and install the switch base hole cover.



3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B085784E01
  1. Engage the 10 clips and install the instrument cluster center finish panel sub-assembly.



4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


B085781E01
  1. Connect the connectors.

  1. Engage the 6 clips and install the instrument cluster finish panel sub-assembly.

  1. Install the 2 clips.



5. INSTALL INSTRUMENT LOWER PANEL LH


    B085788E01
  1. Install the lower instrument panel LH with the 3 bolts <B>.



6. INSTALL NO.1 LOWER INSTRUMENT PANEL FINISH PANEL


B085780E01
  1. Connect the connectors.

  1. Engage the 3 clips and install the lower NO. 1 instrument panel finish panel sub-assembly.

  1. Install the 2 bolts <B>.



7. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


B088394
  1. Connect the hood lock control cable assembly.



    B088397E01
  1. Engage the 2 claws and install the hood lock control lever sub-assembly.



8. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET


E075957
  1. Connect the connector.

  1. Install the radio receiver assembly with bracket with the 4 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }



9. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


B085779E01
  1. Connect the 2 connectors.

  1. Engage the 4 clips and install the air conditioning control assembly.



10. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake)


    B085767E01
  1. Engage the 4 clips and install the instrument panel hole cover.



11. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake)


    B085766E01
  1. Engage the 4 clips and 2 claws, and install the instrument panel under tray.



12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }



13. INSPECT SRS WARNING LIGHT
(Click here)