Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › AIRBAG CUT-OFF SWITCH

AIRBAG CUT-OFF SWITCH > REMOVAL

for Preparation Click here



1. PRECAUTION
(Click here)


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake)


    B085766E01
  1. Disengage the 4 clips and 2 claws, and remove the instrument panel under tray.



4. REMOVE INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake)


    B085767E01
  1. Disengage the 4 clips and remove the instrument panel hole cover.



5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    B085778E01
  1. Using a screwdriver, disengage the 4 clips and remove the air conditioning control assembly.

    HINT:
    Tape up the screwdriver tip before use.

  1. Disconnect the 2 connectors.



6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


E075957
  1. Remove the 4 bolts.

  1. Disconnect the connector and remove the radio receiver assembly with bracket.



7. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


B088397E01
  1. Disengage the 2 claws.



    B088394
  1. Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.



8. REMOVE NO.1 LOWER INSTRUMENT PANEL FINISH PANEL


    B085780E01
  1. Remove the 2 bolts <B>.

  1. Disengage the 3 clips and remove the lower No. 1 instrument panel finish panel.

  1. Disconnect the connectors.



9. REMOVE INSTRUMENT LOWER PANEL LH


    B085788E01
  1. Remove the 3 bolts <B> and the lower instrument panel LH.



10. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B085781E01
  1. Remove the 2 clips.

  1. Disengage the 6 clips and remove the instrument cluster finish panel sub-assembly.

  1. Disconnect the connectors.



11. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B085784E01
  1. Disengage the 10 clips and remove the instrument cluster center finish panel sub-assembly.



12. REMOVE SWITCH BASE HOLE COVER


    C121180
  1. Disengage the 3 claws and remove the switch base hole cover.



13. REMOVE AIRBAG CUT OFF SWITCH


    C123153
  1. Disconnect the airbag cut off switch connector.

  1. Remove the instrument cluster finish panel sub-assembly center while holding the 2 claws of the airbag cut off switch.