- NOTICE:
- If the ECM is replaced, register the ECU communication ID for Engine Immobiliser System (Click here).
- Make sure to perform Reset Memory (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM.
- For A340E automatic transmission models (Click here).
- For A340F automatic transmission models (Click here).
- Perform Registration (VIN registration) when replacing the ECM (Click here).
- Perform initialization (throttle position) after replacing the throttle body assembly or cleaning any throttle body components .
- Perform initialization (throttle position) after reconnecting the battery cable or replacing the ECM .
- HINT:
- Initialization cannot be completed by only disconnecting and reconnecting the cable of the negative (-) battery terminal.
- NOTICE:
- Observe the following items for safety reasons:
- Before using the Techstream, read the instruction manual.
- Prevent the Techstream cable from being caught on the pedals, shift lever or steering wheel when driving with the Techstream connected to the vehicle.
- When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One is for driving the vehicle, and the other operates the Techstream.