TIRE PRESSURE WARNING SYSTEM > REGISTRATION |
| 1. DESCRIPTION OF CODE REGISTRATION |
Before registration
In case of tire pressure warning ECU replacement:
In case of tire pressure warning valve and transmitter replacement:

| 2. REGISTER TRANSMITTER ID |
Set the air pressure of all tires to the specified values (Click here).
Turn the ignition switch OFF.
Connect the Techstream to the DLC3.
Turn the ignition switch ON and the Techstream on.
Enter the following menus: Chassis / Tire Pressure Monitor / Utility / ID Registration /
Perform the procedures displayed on the screen.
Confirmation of transmitter ID registration:
Enter the following menus: Chassis / Tire Pressure Monitor / Data List /
Read the "ID Tire Inflation Pressure" values.
Confirm that the tire pressure data of all tires are displayed on the screen.