Home › BODY ELECTRICAL › DOOR LOCK › KEY REMINDER WARNING SYSTEM

KEY REMINDER WARNING SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
Use this procedure to troubleshoot the key reminder warning system.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK

      NEXT


      3.BATTERY VOLTAGE INSPECTION
      1. Check the battery voltage.

        Standard Voltage:
        11 to 14 V

      2. If the voltage is below 11 V, recharge the battery before proceeding.

      NEXT


      4.PROBLEM SYMPTOMS TABLE
      1. If the fault is not listed on the problem symptoms table, proceed to A.

      2. If the fault is listed on the problem symptoms table, proceed to B.



      B.
      Go to step 6
      A


      5.OVERALL ANALYSIS AND TROUBLESHOOTING
      1. On-vehicle inspection (Click here).

      2. Terminals of ECU (Click here).


      NEXT


      6.ADJUSTMENT, REPAIR OR REPLACEMENT

        NEXT


        7.CONFIRMATION TEST

          NEXT

          END