Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

DTC    C0-40    Antenna not Connected

DTC    C0-41    Antenna Shorted

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
C0-40
Antenna is not connected.
  1. Antenna cord sub-assembly
  1. Satellite radio antenna assembly
  1. Radio receiver assembly
C0-41
Short in antenna circuit

INSPECTION PROCEDURE

NOTICE:
After replacing the radio receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK CONNECTOR CONNECTION CONDITION
  1. Check that the antenna cord sub-assembly is securely connected to the radio receiver assembly connector.

    OK:
    The cord is securely connected.



NG
RECONNECT CONNECTOR CORRECTLY
OK


2.REPLACE SATELLITE RADIO ANTENNA ASSEMBLY
  1. Replace the satellite radio antenna assembly (Click here).

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same DTC is output again.

    OK:
    No DTCs are output.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END