Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

DTC    62-41    Wrong Disc

DTC    62-42    Disc cannot be Read

for Preparation Click here


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
62-41
An unsuitable disc is inserted.
  1. CD
  2. Radio receiver assembly
62-42
The disc cannot be read.

INSPECTION PROCEDURE

NOTICE:
After replacing the radio receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc.



NG
CHANGE DISC
OK


2.DISC CLEANING


    I100151
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or anti-static preservative.


NEXT


3.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


4.RECHECK FOR DTC
  1. Recheck for DTCs and check if the same DTC is output again.

    OK:
    No DTCs are output.



NG
Go to step 5
OK

END 

5.REPLACE DISC AND RECHECK
  1. Replace the disc and recheck.

    1. Replace the disc with a known good one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check if the same DTC is output again.

      OK:
      No DTCs are output.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END