AUDIO AND VISUAL SYSTEM > Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory |
| 1.CHECK RADIO RECEIVER ASSEMBLY |
Check radio condition.
| Condition | Proceed to |
| Broadcast cannot be selected | A |
| Broadcast can be selected, but selection cannot be memorized | B |
|
| ||||
| A | ||
| ||
| 2.CHECK RADIO RECEIVER ASSEMBLY |
Check the number of preset channels.
| Condition | Proceed to |
| 18 Channels have already been preset | A |
| 0 to 17 Channels have been preset | B |
|
| ||||
| A | ||
| ||
| 3.CHECK BATTERY |
Check if the battery was replaced.
|
| ||||
| OK | ||
| ||
| 4.ADD PRESET CHANNEL INTO MEMORY AGAIN |
Check if the preset channels that have been cleared can be added into memory again.
|
| ||||
| OK | ||
| ||