NAVIGATION SYSTEM (for Double Cab) > Screen Flicker or Color Distortion |
| 1.CHECK DISPLAY SETTING |
![]() |
Enter the display adjustment screen by pressing the "DISP" switch.
Reset display settings (contrast, brightness) and check that the screen appears normal.
![]() |
Press the "INFO" switch and then select "Screen Setting".
![]() |
Set the "Switch Color" to "Green" (initial setting) and check if the display returns to normal.
|
| ||||
| OK | ||
| ||
| 2.CHECK CABIN |
Check that the cabin temperature is warmer than -20°C (-4.0°F).
|
| ||||
| OK | |
| 3.CHECK COLOR BAR (DISPLAY CHECK MODE) |
![]() |
Enter the "Display Check" mode (Color Bar Check) (Click here).
Check that the color bars match the displayed names.
| Result | Proceed to |
| OK | A |
| NG (for Column Shift Type) | B |
| NG (for Floor Shift Type) | C |
|
| ||||
|
| ||||
| A | |
| 4.CHECK NAVI COLOR BAR (NAVIGATION CHECK MODE) |
![]() |
Enter the "Navigation Check" mode (NAVI Color Bar Check) (Click here).
Check that the color bars match the displayed names.
| Result | Proceed to |
| OK | A |
| NG (for Column Shift Type) | B |
| NG (for Floor Shift Type) | C |
|
| ||||
|
| ||||
| A | ||
| ||