Home › TRANSMISSION ยท AB60E AUTOMATIC TRANSMISSION › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Some systems need to be initialized after the cable is reconnected (Click here).



2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


C161106
  1. Remove the nut and disconnect the cable.



3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
  1. Disconnect the switch connector.



    C161107
  1. Remove the nut, spring washer and transmission control shaft lever RH.



    C161108
  1. Using a screwdriver, bend the tabs of the lock washer.



    C161109
  1. Remove the lock nut and lock washer.



    C161110
  1. Remove the bolt and switch.