TRANSMISSION WIRE > INSTALLATION |
| 1. INSTALL TRANSMISSION WIRE |
Coat the O-ring of the transmission wire connector with ATF.
![]() |
Install the 2 transmission wires with the 2 bolts.
![]() |
Connect the 2 transmission wire connectors.
| 2. CONNECT TRANSMISSION WIRE |
![]() |
Connect the 9 connectors to the solenoid valves.
Connect the 2 ATF temperature sensors with the 2 clamps and 2 bolts.
| 3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
![]() |
Coat a new O-ring with ATF and install it to the oil strainer.
Install the oil strainer with the 4 bolts.
| 4. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY |
![]() |
Install the 4 transmission oil cleaner magnets to the oil pan.
![]() |
Install a new gasket and the oil pan with the 12 bolts.
![]() |
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. ADD AUTOMATIC TRANSMISSION FLUID |
Add automatic transmission fluid (Click here).