Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for CrewMax)

DTC    01-E2    ON / OFF Indication Parameter Error

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
01-E2
Signal for ON / OFF control from master device has problem.
Navigation receiver

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.REPLACE NAVIGATION RECEIVER
  1. Replace the navigation receiver (for Column Shift Type) (Click here).

  1. Replace the navigation receiver (for Floor Shift Type) (Click here).


NEXT

END