DTC 58-43 SPD Signal Error |
DTC 80-43 SPD Signal Error |
| DTC Code | DTC Detection Condition | Trouble Area |
| 58-43 | Difference between GPS speed and SPD pulse is detected. |
|
| 80-43 |
| 1.CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE) |
![]() |
Enter the "Navigation Check" mode (Vehicle Sensors) (Click here).
While driving the vehicle, compare the "SPD" indicator to the reading on the speedometer. Check if these readings are almost equal.
| Result | Proceed to |
| OK (for Column Shift Type) | A |
| OK (for Floor Shift Type) | B |
| NG | C |
|
| ||||
|
| ||||
| A | ||
| ||