BRAKE PEDAL > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) |
![]() |
Detach the 6 claws and 3 clips, and remove the scuff plate.
| 3. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) |
![]() |
Detach the 6 claws and 3 clips, and remove the scuff plate.
| 4. REMOVE COWL SIDE TRIM BOARD LH |
![]() |
Remove the clip.
Detach the 2 clips and remove the cowl side trim board.
| 5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
Remove the hood lock control lever.
Remove the 2 bolts.
Detach the 4 clips and claw.
![]() |
for Automatic Air Conditioning System:
Detach the 2 claws and remove the sensor.
Remove the finish panel and then disconnect the connectors.
| 6. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT |
![]() |
Remove the 4 bolts.
Detach the 2 claws.
Remove the safety pad and then disconnect the connector.
| 7. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY |
![]() |
Remove the bolt and air duct.
| 8. REMOVE PUSH ROD PIN |
Remove the clip and push rod pin from the brake pedal lever.
| 9. REMOVE STOP LIGHT SWITCH ASSEMBLY |
Disconnect the stop light switch connector.
Remove the stop light switch .
Detach the harness clip.
| 10. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER |
Remove the stop light switch mounting adjuster .
| 11. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY |
![]() |
Remove the brake pedal return spring.
Remove the bolt from the No. 3 brake pedal bracket.
![]() |
Remove the bolt, nut and No. 3 brake pedal bracket from the brake pedal support.
![]() |
Remove the 4 nuts and brake pedal support.
| 12. REMOVE BRAKE PEDAL PAD |
![]() |
Remove the brake pedal pad.