LIN COMMUNICATION SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING |
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
| |||||
| 3.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM* |
Using the Techstream, inspect the CAN communication function to ensure there are no malfunctions in the CAN communication system (Click here).
| Result | Proceed to |
| No DTCs output | A |
| DTCs output | B |
|
| ||||
| |||||
| 4.PROBLEM SYMPTOMS TABLE |
Refer to the problem symptoms table (Click here).
| Result | Proceed to |
| Fault is not listed in problem symptoms table | A |
| Fault is listed in problem symptoms table | B |
|
| ||||
| |||||
| 5.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Terminals of ECU (Click here)
Data List / Active Test (Click here)
| |||||
| 6.REPAIR OR REPLACE |
|
| ||||
|---|---|---|---|---|---|