Home › ENGINE ยท 1GR-FE › ENGINE MECHANICAL › REAR CRANKSHAFT OIL SEAL

REAR CRANKSHAFT OIL SEAL > REMOVAL

for Preparation Click here



1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY
  1. Remove the automatic transmission (Click here).



2. REMOVE DRIVE PLATE AND RING GEAR


    A076326E05
  1. Using SST, hold the crankshaft.

    SST
    09213-54015   (91651-60855)
    09330-00021  



    A151280
  1. Remove the 8 bolts, rear spacer, drive plate and front spacer.



3. REMOVE REAR CRANKSHAFT OIL SEAL


    A076328E02
  1. Using a knife, cut off the oil seal lip.

  1. Using a screwdriver, pry out the oil seal.

    NOTICE:
    Be careful not to damage the crankshaft. Tape the screwdriver tip.