Home › ENGINE ยท 1GR-FE › STARTING › STARTER (for 2.0 kW Type)

STARTER (for 2.0 kW Type) > INSTALLATION

for Preparation Click here



1. INSTALL STARTER ASSEMBLY


    A159479
  1. Install the starter with the 2 bolts.

    Torque:
    58 N*m{ 591 kgf*cm , 43 ft.*lbf }

  1. Connect the starter connector.

  1. Connect the starter wire with the nut.

    Torque:
    9.8 N*m{ 100 kgf*cm , 87 in.*lbf }

  1. Install the terminal cap.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
Some systems need to be initialized after the cable is reconnected (Click here).