Home › RESTRAINTS › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT INNER BELT ASSEMBLY


B166599E01
  1. Install the front seat inner belt with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.

  1. Driver Side:

    1. Connect the 2 connectors and attach the 4 clamps.

  1. Passenger Side:
    Connect the connector and attach the clamp.



2. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Manual Seat)


B166410E01
  1. Attach the 3 claws in the order shown in the illustration, and install the cushion shield.

  1. Install the screw.



3. INSTALL FRONT SEAT ASSEMBLY (for Power Seat)
  1. Install the front seat (Click here).



4. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
  1. Install the front seat (Click here).



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
Some systems need to be initialized after the cable is reconnected (Click here).