FRONT SEAT OUTER BELT ASSEMBLY (for Regular Cab) > INSTALLATION |
| 1. INSTALL FRONT SEAT OUTER BELT ASSEMBLY |
![]() |
Align the vehicle's claws with the seat belt retractor positioning holes.
Install the seat belt with the 2 bolts.
![]() |
Connect the pretensioner connector as shown in the illustration.
![]() |
Insert the bolt and extension of the anti-rotation device through the quarter trim panel hole into the vehicle body.
Install the seat belt's shoulder anchor with the bolt.
![]() |
Attach the 2 claws to close the seat belt anchor cover.
| 2. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY |
![]() |
Attach the 7 clips to install the quarter trim panel.
![]() |
Twist the seat belt clockwise and install the seat belt anchor with the bolt.
![]() |
Attach the 2 claws to install the cover.
| 3. INSTALL LUGGAGE COMPARTMENT BOX RH |
![]() |
Install the luggage compartment box with the 4 clips.
| 4. INSTALL LUGGAGE COMPARTMENT BOX LH |
![]() |
Attach the 3 claws to install the luggage compartment box.
Install the 2 clips.
| 5. INSTALL UPPER BACK PANEL GARNISH |
![]() |
Attach the 10 clips to install the back panel garnish.
| 6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP |
| 7. INSTALL FRONT DOOR SCUFF PLATE |
![]() |
Attach the 6 claws and 3 clips to install the scuff plate.
| 8. INSTALL FRONT SEAT ASSEMBLY |
for Manual Seat:
Install the front seat (Click here).
for Power Seat:
Install the front seat (Click here).
| 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |