FRONT SEAT OUTER BELT ASSEMBLY (for Double Cab) > INSTALLATION |
| 1. INSTALL FRONT SEAT OUTER BELT ASSEMBLY |
![]() |
Align the vehicle's claws with the seat belt retractor positioning holes.
Install the seat belt with the 2 bolts.
![]() |
Connect the pretensioner connector as shown in the illustration.
![]() |
Install the shoulder anchor to the shoulder belt anchor adjuster with the nut.
| 2. INSTALL CENTER PILLAR GARNISH |
Pass the front seat outer belt floor anchor through the center pillar garnish.
Attach the claw to install the center pillar garnish.
Install the 2 screws.
Install the assist grip with the 2 bolts.
Attach the 2 claws to install the 2 assist grip plugs.

| 3. INSTALL LOWER CENTER PILLAR GARNISH |
![]() |
Attach the 7 clips and 2 claws to install the pillar garnish.
![]() |
Install the seat belt anchor with the bolt.
![]() |
Attach the 2 claws to install the cover.
| 4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP |
| 5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP |
| 6. INSTALL FRONT DOOR SCUFF PLATE |
![]() |
Attach the 6 claws and 3 clips to install the scuff plate.
| 7. INSTALL REAR DOOR SCUFF PLATE |
![]() |
Attach the 6 claws and 2 clips to install the scuff plate.
| 8. INSTALL FRONT SEAT ASSEMBLY |
for Manual Seat:
Install the front seat (Click here).
for Power Seat:
Install the front seat (Click here).
| 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |