Home › ENGINE ยท 3UR-FBE › ENGINE CONTROL SYSTEM › KNOCK SENSOR

KNOCK SENSOR > REMOVAL

for Preparation Click here



1. REMOVE INTAKE MANIFOLD
  1. Remove the intake manifold (Click here).



2. REMOVE NO. 2 CYLINDER HEAD COVER


A158576


3. REMOVE NO. 1 ENGINE COVER


A158581


4. REMOVE SEPARATOR CASE


    A163108
  1. Remove the 4 bolts and separator case.



5. REMOVE KNOCK SENSOR


A158615
  1. Disconnect the 4 knock sensor connectors.

  1. Remove the 4 bolts and 4 knock sensors.