Home › RESTRAINTS › SEAT BELT › SHOULDER BELT ANCHORAGE (except Regular Cab)

SHOULDER BELT ANCHORAGE (except Regular Cab) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.



1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY


B166715
  1. Align the adjuster positioning hole with the claw, and install the adjuster with the 2 bolts.

    HINT:
    First install the upper bolt, and then install the lower bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY
  1. Install the seat belt (Click here).