KNOCK SENSOR > INSTALLATION |
| 1. INSTALL KNOCK SENSOR |
![]() |
Install the 4 sensors with the 4 bolts so that the sensors are angled as shown in the illustration.
Connect the 4 sensor connectors.
| 2. INSTALL SEPARATOR CASE |
![]() |
Install the separator case with the 4 bolts.
| 3. INSTALL NO. 1 ENGINE COVER |
![]() |
| 4. INSTALL NO. 2 CYLINDER HEAD COVER |
![]() |
| 5. INSTALL INTAKE MANIFOLD |
Install the intake manifold (Click here).