Home
›
ENGINE ยท 2UZ-FE
›
ENGINE CONTROL SYSTEM
›
MASS AIR FLOW METER
MASS AIR FLOW METER > INSTALLATION
for Preparation
Click here
1. INSTALL MASS AIR FLOW METER
Install the MAF meter with the 2 screws.
Torque:
1.7 N*m{ 17 kgf*cm , 15 in.*lbf }
Connect the MAF connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
Some systems need to be initialized after the cable is reconnected (
Click here
).