Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Fold Down Seat Type)

FRONT SEAT ASSEMBLY (for Fold Down Seat Type) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT ASSEMBLY RH
  1. Install the front seat.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Connect the seat wire connectors under the seat.

  1. Operate the seat track adjusting handle to move the seat to the rearmost position.



    B165518
  1. Install the 2 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Operate the seat track adjusting handle to move the seat to the foremost position.



    B165517
  1. Install the 2 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



2. INSTALL OUTER FRONT SEAT TRACK COVER RH REAR


B165516
  1. Attach the 2 claws to install the seat track cover.



3. INSTALL INNER FRONT SEAT TRACK COVER RH REAR


B165515
  1. Attach the 2 claws to install the seat track cover.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
Some systems need to be initialized after the cable is reconnected (Click here).



5. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).