Home › BODY ELECTRICAL › METER › ACCESSORY METER

ACCESSORY METER > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
  1. for Column Shift Type:
    Remove the instrument panel (Click here).

  1. for Floor Shift Type:
    Remove the instrument panel (Click here).



2. REMOVE NO. 1 HEATER TO REGISTER DUCT WITH NO. 2 HEATER TO REGISTER DUCT


  1. Remove the 5 screws and duct.


    B161141



3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT


    B160598
  1. Remove the 2 screws.

  1. Detach the claw and remove the duct.



4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    B160595
  1. Remove the 3 screws and register.



5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT


    B160599
  1. Remove the 2 screws.

  1. Detach the claw and remove the duct.



6. REMOVE DEFROSTER NOZZLE ASSEMBLY


    B160597
  1. Remove the 3 screws and nozzle.



7. REMOVE ACCESSORY METER ASSEMBLY


    B160594
  1. Disconnect the accessory meter connector.

  1. Remove the 3 screws and accessory meter.