Home
›
ENGINE ยท 1GR-FE
›
FUEL
›
FUEL PUMP ECU
FUEL PUMP ECU > INSTALLATION
for Preparation
Click here
1. INSTALL FUEL PUMP ECU
Install the fuel pump ECU with the 2 nuts.
Torque:
20 N*m{ 199 kgf*cm , 14 ft.*lbf }
NOTICE:
Do not use the fuel pump ECU if it has been subjected to physical shocks such as being dropped, etc.
Connect the 2 fuel pump ECU connectors.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
Some systems need to be initialized after the cable is reconnected (
Click here
).