Home › ENGINE ยท 2UZ-FE › FUEL › FUEL PUMP ECU

FUEL PUMP ECU > INSTALLATION

for Preparation Click here



1. INSTALL FUEL PUMP ECU


    C154221
  1. Install the fuel pump ECU with the 2 nuts.

    Torque:
    20 N*m{ 199 kgf*cm , 14 ft.*lbf }

    NOTICE:
    Do not use the fuel pump ECU if it has been subjected to physical shocks such as being dropped, etc.

  1. Connect the 2 fuel pump ECU connectors.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
Some systems need to be initialized after the cable is reconnected (Click here).