1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
Some systems need to be initialized after the cable is reconnected (Click here).
After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
2. REMOVE FUEL PUMP ECU
Disconnect the 2 fuel pump ECU connectors.
Remove the 2 nuts and fuel pump ECU.
NOTICE:
Make sure the fuel pump ECU is not subjected to physical shocks such as being dropped, etc.