DTC P060D Internal Control Module Accelerator Pedal Position Performance |
| DTC Code | DTC Detection Condition | Trouble Area |
| P060D | ECM main CPU error | ECM |
| Related DTCs | None |
| Required sensors/Components (Main) | ECM |
| Required sensors/Components (Related) | - |
| Frequency of operation | Continuous |
| Duration | 1 second |
| MIL operation | Immediate |
| Sequence of operation | None |
| None | - |
| Difference of main APP and sub APP | 0.3 V or more |
| 1.CHECK DTC |
Clear DTC (Click here).
Turn the ignition switch OFF.
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
Connect the cable to the negative (-) battery terminal.
Turn the ignition switch ON.
Check DTC.
|
| ||||
| OK | ||
| ||