REAR DOOR SPEAKER (for Double Cab) > INSTALLATION |
| 1. INSTALL REAR NO. 1 SPEAKER ASSEMBLY |

Temporarily install the speaker by attaching the claws of the speaker to the door panel.
Install the speaker with the 3 screws.
Connect the connector.
| 2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH |
![]() |
Connect the 2 cables to the inside handle.
Attach the inside handle's knob to the door trim board.
![]() |
Attach the 9 clips to install the door trim board.
Install the inside handle and door trim board to the door trim panel with the screw.
Install the door trim board to the door panel with the screw
Attach the clip.
| 3. INSTALL COURTESY LIGHT ASSEMBLY |
![]() |
Connect the connector.
Attach the claw to install the courtesy light.
| 4. INSTALL REAR DOOR ARMREST COVER LH |
| 5. INSTALL REAR UPPER DOOR ARMREST BASE PANEL LH |
![]() |
Connect the connector.
Attach the 2 clips to install the rear upper door armrest base panel.
| 6. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH |
![]() |
Attach the 4 claws to install the bezel plug.
| 7. INSTALL REAR DOOR FRAME GARNISH LH |
![]() |
Attach the 4 clips to install the rear door frame garnish.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |