Home › BODY ELECTRICAL › AUDIO / VISUAL › FLOOR SPEAKER (for Double Cab)

FLOOR SPEAKER (for Double Cab) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. Some systems need to be initialized after the cable is reconnected (Click here).
  2. After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.



2. REMOVE NO. 1 BOX SPEAKER ASSEMBLY


B165742
  1. Disconnect the connector.

  1. Remove the 4 bolts and box speaker.