RADIO ANTENNA > INSTALLATION |
| 1. INSTALL FENDER ANTENNA ASSEMBLY |
![]() |
Install the antenna with the bolt.
![]() |
Attach the 5 clamps and install the bolt.
Connect the connector.
| 2. INSTALL FENDER APRON MUDGUARD SEAL RH |
for Steel Type Bumper:
Install the fender apron mudguard seal.
Install the fender apron mudguard with the 3 clips and 15 new clips labeled A.

w/ Front Fender Mudguard:
Install the front fender mudguard .
w/ Side Step:
Install the side step .
for Resin Type Bumper:
Install the fender apron mudguard seal.
Install the fender apron mudguard with the 2 clips and 15 new clips labeled A.
Install the pin hold clip so that its groove is vertical.

w/ Front Fender Mudguard:
Install the front fender mudguard .
w/ Side Step:
Install the side step .
| 3. INSTALL ANTENNA ORNAMENT |
![]() |
Install the antenna ornament as shown in the illustration.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |