Home › BODY ELECTRICAL › AUDIO / VISUAL › STEREO JACK ADAPTER ASSEMBLY (for Column Shift Type)

STEREO JACK ADAPTER ASSEMBLY (for Column Shift Type) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. Some systems need to be initialized after the cable is reconnected (Click here).
  2. After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.



2. REMOVE FRONT DOOR SCUFF PLATE LH
  1. for Double Cab:
    Remove the front door scuff plate LH .

  1. for Regular Cab:
    Remove the front door scuff plate LH .

  1. for CrewMax:
    Remove the front door scuff plate LH .



3. REMOVE COWL SIDE TRIM BOARD LH


B165704
  1. Remove the clip.

  1. Detach the 2 clips and remove the cowl side trim board.



4. REMOVE INSTRUMENT SIDE PANEL LH


    B160581
  1. Using a moulding remover, detach the 7 claws and remove the side panel.



5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


    B160582
  1. Remove the hood lock control lever.

  1. Remove the 2 bolts.

  1. Detach the 4 clips and claw.



    B163883
  1. for Automatic Air Conditioning System:
    Detach the 2 claws and remove the sensor.

  1. Remove the finish panel and then disconnect the connectors.



6. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    B160583
  1. Disconnect the connector and clamp.

  1. Detach the 12 clips and remove the finish panel.



7. REMOVE CENTER LOWER INSTRUMENT COVER


  1. Remove the 2 clips and cover.


    B171284E01



8. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY


9. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL


    B160587
  1. Remove the 2 screws.

  1. Detach the 4 clips.

  1. Remove the finish panel and then disconnect the connectors.



10. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY


    B161766
  1. Detach the 2 claws and remove the door box.



    B161767
  1. Remove the 4 screws.

  1. Detach the 4 clips and remove the cup holder.



11. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY (for Manual Air Conditioning System)


    B160589
  1. Detach the 4 clips.

  1. Remove the panel and then disconnect the connectors.



12. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY (for Automatic Air Conditioning System)


    B160588
  1. Detach the 4 clips.

  1. Remove the panel and then disconnect the connectors.



13. REMOVE STEREO JACK ADAPTER ASSEMBLY


B164811
  1. Detach the 2 claws and remove the stereo jack adapter.