FRONT DOOR SPEAKER (for CrewMax) > INSTALLATION |
| 1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY (for 12 Speakers) |
![]() |
Attach the 3 claws to install the speaker to the bracket.
![]() |
Install the speaker with bracket to the lower frame bracket garnish with the 3 screws.
| 2. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY |

Temporarily install the speaker by attaching the claws of the speaker to the door panel.
Install the speaker with the 4 screws.
Connect the connector.
| 3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
![]() |
Connect the 2 cables to the inside handle.
Connect the connector.
Attach the inside handle's knob to the door trim board.
![]() |
Attach the 9 clips to install the door trim board.
Install the inside handle and door trim board to the door trim panel with the screw.
Install the door trim board to the door panel with the screw.
Install the clip.
| 4. INSTALL FRONT DOOR ARMREST COVER LH |
| 5. INSTALL COURTESY LIGHT ASSEMBLY |
![]() |
Attach the claw to install the courtesy light.
Connect the connector.
| 6. INSTALL FRONT UPPER ARMREST BASE PANEL LH |
![]() |
Connect the connectors.
Attach the 2 clips to install the front armrest upper base panel.
| 7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH |
![]() |
Attach the 4 claws to install the bezel plug.
| 8. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH |
![]() |
Attach the 3 clips to install the front lower door frame bracket garnish.
| 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |