FRONT DOOR SPEAKER (for CrewMax) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT LOWER DOOR FRAME BRACKET GARNISH LH |
![]() |
Detach the 3 clips and remove the front lower door frame bracket garnish.
| 3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH |
![]() |
Using a screwdriver, detach the 4 claws and remove the inside handle bezel.
| 4. REMOVE FRONT UPPER ARMREST BASE PANEL LH |
![]() |
Using a screwdriver, detach the 2 clips and front upper armrest base panel.
Disconnect the connectors.
| 5. REMOVE FRONT DOOR ARMREST COVER LH |
| 6. REMOVE COURTESY LIGHT ASSEMBLY |
![]() |
Detach the claw and remove the courtesy light from the door trim board.
Disconnect the connector.
| 7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
![]() |
Remove the 2 screws.
Remove the clip.
Detach the 9 clips and remove the trim board cover. Then disconnect the connector.
![]() |
Disconnect the 2 cables from the inside handle.
Remove the inside handle.
| 8. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY |

Disconnect the speaker connector.
Remove the 4 screws and speaker.
| 9. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY (for 12 Speakers) |
![]() |
Remove the 3 screws and speaker with bracket.
![]() |
Detach the 3 claws and remove the speaker from the bracket.