Home › BODY ELECTRICAL › AUDIO / VISUAL › MICROPHONE AMPLIFIER

MICROPHONE AMPLIFIER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. Some systems need to be initialized after the cable is reconnected (Click here).
  2. After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.



2. REMOVE ROOF CONSOLE BOX ASSEMBLY
  1. Remove the roof console box .



3. REMOVE MICROPHONE AMPLIFIER ASSEMBLY


B168142E01
  1. Disconnect the connector.

  1. Detach the 2 claws and clip, and remove the microphone.