Home › BODY ELECTRICAL › AUDIO / VISUAL › FLOOR SPEAKER (for CrewMax)

FLOOR SPEAKER (for CrewMax) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. Some systems need to be initialized after the cable is reconnected (Click here).
  2. After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.



2. REMOVE BACK PANEL GARNISH RH


B169224E03
  1. Remove the package holder net hook.

  1. Detach the 8 clips and remove the back panel trim.



3. REMOVE BACK PANEL GARNISH LH
  1. Remove the package holder net hook.



  1. Detach the 8 clips and remove the back panel trim.


    B170105E03



4. REMOVE NO. 1 BOX SPEAKER ASSEMBLY


B165741
  1. Disconnect the connector.

  1. Remove the 3 bolts and box speaker.