- CAUTION:
- When using the Techstream, observe the following items for safety reasons:
- Read its instruction books before using the Techstream.
- Prevent the Techstream cable from being caught on the pedals, shift lever and steering wheel when driving with the Techstream connected to the vehicle.
- When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One person drives the vehicle, and the other operates the Techstream.
- NOTICE:
- After the ignition switch is turned off, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch off, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
- When the learned value of alcohol concentration varies from the actual alcohol concentration in the fuel, perform alcohol concentration learning (Click here).
- Perform initialization (throttle position) after replacing the throttle body assembly or cleaning any throttle body components .
- Perform initialization (throttle position) after reconnecting the battery cable or replacing the ECM .
- Perform RESET MEMORY (AT initialization) when replacing the automatic transmission assembly, engine assembly or ECM (Click here).
- Perform REGISTRATION (VIN registration) when replacing the ECM (Click here).
- HINT:
- RESET MEMORY cannot be completed by only removing the battery.