POWER WINDOW CONTROL SYSTEM (w/o Jam Protection Function) > HOW TO PROCEED WITH TROUBLESHOOTING |
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
| |||||
| 3.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM* |
Use the Techstream to check if the CAN communication system is functioning normally.
| Result | Proceed to |
| CAN DTC is not output | A |
| CAN DTC is output | B |
|
| ||||
| |||||
| 4.PROBLEM SYMPTOMS TABLE |
Refer to the problem symptoms table (Click here).
| Result | Proceed to |
| Fault not listed in problem symptoms table | A |
| Fault listed in problem symptoms table | B |
|
| ||||
| |||||
| 5.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Operation Check (Click here).
Terminals of ECU (Click here).
Data List / Active Test (Click here).
| |||||
| 6.REPAIR OR REPLACEMENT |
| |||||
| 7.CONFIRMATION TEST |
|
| ||||
|---|---|---|---|---|---|