BODY > GENERAL MAINTENANCE |
| 1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY |
Where necessary, tighten all the parts of the chassis.
Where necessary, tighten all the parts of the body.
| 2. INSPECT TIRE AND INFLATION PRESSURE (Except North America) |
Inspect the tires for wear and proper inflation pressure (Click here).
| 3. INSPECT LIGHTS, HORN, WIPERS AND WASHERS (Except North America) |
| 4. REPLACE AIR CONDITIONING FILTER |
Remove the glove compartment assembly.
Remove the filter case from the filter outlet.
Remove the filter from the filter case.
Replace the filter with a new one.
Install the filter case to the filter outlet.
Install the glove compartment assembly.
| 5. INSPECT REFRIGERANT AMOUNT FOR AIR CONDITIONER (Except North America) |
Check the refrigerant pressure (Click here).
| 6. FINAL INSPECTION |
Check the operation of the body parts.
Hood
Front and rear doors
Tail gate door
Seats
Be sure to deliver a clean vehicle. Especially check: