NAVIGATION SYSTEM (for DVD) > Radio Broadcast cannot be Received or Poor Reception |
| 1.CHECK NAVIGATION RECEIVER |
Check the radio's automatic station search function.
Check the radio's automatic station search function by activating it.
|
| ||||
| OK | ||
| ||
| 2.CHECK OPTIONAL COMPONENTS |
Check optional components (sun-shade film, telephone antenna, etc.).
Check if any optional components, such as a sunshade film or telephone antenna that may decrease reception capacity, are installed.
|
| ||||
| OK | ||
| ||
| 3.CHECK NAVIGATION RECEIVER ASSEMBLY |
![]() |
Preparation for check
Remove the antenna plug from the navigation receiver.
Check for noise
Turn the ignition switch ACC with the navigation receiver connector connected.
Turn the radio on and enter AM mode.
Place a screwdriver, thin wire, or other metal object on the navigation receiver's antenna jack and check that noise can be heard from the speaker.
|
| ||||
| OK | |
| 4.REPLACE FENDER ANTENNA ASSEMBLY |
Replace the fender antenna assembly (Click here) and check that it operates normally.
|
| ||||
| OK | ||
| ||